深圳市亚美德(Rmede)科技有限公司 battery charger,12 volt battery chargers , china battery charger manufacturer

RL0508S,battery charger,12 volt battery chargers , china battery charger manufacturer

RL0508S

    Product Feature

  • Input Voltage:AC 100~240V
  • Output Power:5w
  • Output Voltage:8.4V  0.5A
  • Suit Battery:7.4V  800~ 2500mAh
  • Charge mode:C.C then CV
  • Charge indicator:Bi-color LED
  • Safety:CE CUL approved
  • Size:65 x 61 x 25mm

Specification

>>Download

RL0508S Li-ion Battery Charger

NO ITEM UNIT SPECIFICATION REMARK
INPUT
01 Rating Input Voltage V ac 100~240Vac 50/60Hz  
02 Input voltage range V ac 90~264Vac  
03 Rating Input Current A 0.1Arms INPUT:220V OUTPUT:Full load
04 Max. input power W 6  
OUTPUT
05 Rating output voltage V dc 8.4V  
06 Output voltage range V dc 6VDC ~ 8.4  
07 Suit with Battery type Ah 7.2V LI-ION <3.0Ah  
08 Constant Charge current A 0.5 ± 0.06A  
09 Constant Voltage V 8.37 ~ 8.57V  
10 Charge end current A <0.08  
11 Typical charge time hour 7~8 hours For 1.8Ah Li-ion pack
12 Max. output power W 4W  
13 Hold-on time ms NC  
14 Ripple current mA 50 Input: 220Vac Output: Full load
15 Charge finish condition   V>8.4V + I<0.08A  
16 LED color   Red: charging Green: finish/idle  
17 Output short-circuit protect - Yes  
18 Efficiency % >60% At max. load
Environment
19 Operate temperature °C -10 ~ +40 Full load & natural convection.
20 Operate humidity %RH < +90 Relative humidity, non-condensing.
20 Storage temperature °C -40 ~ +70  
22 Storage humidity %RH 0 ~ +95 Relative humidity, non-condensing.
23 Cooling - Natural convection  
24 Temperature factor % -  
25 Vibration resistance - 5MM/50HZ/600S Non-operating condition.
26 Impact resistance - 1 meter drop test >= 3 times Non-operating condition.
Mechanical
27 Weight g 90  
28 Size mm 61X65X25 Casing only
29 Connectors - Defined when order  
Safety
30 Max. temperature rise °C < 40 on casing At any line and Max. Load
31 Safety standards - GB4943 UL1950 EN60950  
32 EMC standard - EN55022 B  
33 MTBF hrs 30000  
34 Limited power source VA 50  
35 ESD kV 8.0  
36 Hi-Pot Insulation V i/p to o/p: 3000 (1 min.) For final unit, cut-off current =10mA

>>Download

Leave your message
Content
Telephone
Email